OBD male to OBD female cable(Variable shape)
- Material
- contact parts: nickel-plated brass or gold-plated brass.
- connector insulation: PA66 + 30% glass fiber.
- wire conductor: oxygen-free copper wire, cross-sectional area 0.22MM2 to 0.5MM2; insulation PVC
- Wire outside diameter: width 25mm * 4mm, length customized.
- Color: red and yellow color matching or red and orange color matching, of course, both ends can also be customized according to customer requirements.
- Temperature: product temperature resistance -40 ℃ to 125 ℃.
- Plug test: more than 5000 times.
- Swing test: weight 500g of French code, ± 90 ° swing 3000 times or more.
- On-resistance: ≤ 5Ω.
- Insulation impedance: ≥ 5MΩ.
- Withstand voltage: 300VDC.
- Quality certification: ROHS, REACH, ISO9001, IATF16949, UL, SGS.
- Standard: Comply with QC/T29106-2014 "Technical Conditions for Automotive Wire Harness".
- Factory inspection: 100% conduction test, full inspection of appearance.
Design features
The wire can be bent shape, convenient for any space use, in addition to the basic PVC outside, and then add a layer of PET woven mesh tube to achieve double protection.
OBD female terminal with 360 ° ring design can ensure full contact with the male terminal, so that the conductivity is more safe and reliable, non-market tuning fork type two-point contact.
The width of the national standard male terminal is 1.5MM, but considering that the car diagnostic seat is plugged by different width connectors on the market, resulting in the female seat terminal loose, in this case, our products use 1.65MM wide terminal design to better meet the different conditions of the car diagnostic seat adaptation needs.
The car diagnostic port is generally hidden, so when the male OBD connector of the adapter cable is inserted into the female seat on the car, and the female seat is then connected to the diagnostic equipment for diagnosis, for various reasons, it may be necessary to dial off the equipment, at this time, the female end of the product will fall in the corner of the car, if the diagnostic equipment is connected again, it is necessary to look in the dark, and our products can make its OBD female plug stand in a bright Our product can let its OBD female plug stand in a bright space, so you don't need to look around when you use it again, which is convenient to use.
At the beginning of the design, we have reserved a place on the product, you can print the logo or other seals, your choice.
Production process
These products will go through the process of cutting wires - stripping wires - end pressing (or soldering) - assembling connectors - overmolding - testing, etc. We have more than 15 years of production experience and professional team to provide you with advantageous services.
